Removal of weld seams on stainless steel, steel and aluminum
1. Pre-sand with coarse grinding grits (60-100 grits) according to the thickness of the welding seam.
2. As soon as the welding seam has almost been sanded to the level of the surface, change to a finer grit (120-180 grits). Function through the sequence of ever finer grits until the requested finish is accomplished. Don’t skip grit levels. Get more information about you could try this out
3. Use SCM belts to attain a decorative finish:
Use a 100/120 or even a 180/240 granulation SCM belt to attain a dull finish. Machine really should be set to “3” on the RPM pre-set dial.
Use a 400 granulation SCM belt to achieve a brilliant finish. Machine ought to be set to “6” around the RPM pre-set dial.
NOTE: Usually do not skip grit levels as this will leave an unfavorable finish.
Removal of scratches from stainless steel and non-ferrous metal
1. The deeper the scratch, the coarser the grit is always to be used.
2. Start out sanding together with the coarsest grit. Machine really should be set to “2” around the RPM pre-set dial. Move the sander over the entire region on the scratch.
When the scratch is practically invisible, begin working with ever finer grits till requested finish has been achieved.
Achieving a polished mirror finish on stainless steel and non-ferrous metal
1. Start having a coarse grit. Work the surface until you have a “universal scratch pattern”.
2. Step by way of the many grit levels (grit 400, grit 600, grit 1,500) until you have got completed using the finest grit.
NOTE: Only proceed towards the subsequent grit level when a universal scratch pattern has been accomplished.