New Yorker Electronics is Distributing ATS Cold Plates with Advanced Thermal Performance

NORTHVALE, New Jersey, USA – With today’s high-powered semiconductors and IGBT modules, air cooling is often an inadequate method of preventing a costly thermal breakdown. For cooling high-powered electronics, IGBT modules, lasers, wind turbines, motor devices, automotive components or medical equipment, engineers are looking to liquid cooling solutions and cold plates are a preferred method for supplying localized cooling to high power electronics.

By transferring heat from the device to a liquid that flows to a remote heat exchanger, the heat dissipates into either the ambient or to another liquid in a secondary cooling system. ATS (Advanced Thermal Systems) new ATS-CP Series of IGBT Liquid Cold Plates provide a uniquely high thermal performance because of their mini-channel fin design. The internal, mini-channel fin structure enhances the surface area to maximize heat transfer with low pressure drop characteristics and provides uniform cold plate surface temperature.

As such, the ATS-CP series of cold plates, at a flow rate of 4 L/min, can transfer 1kW of heat between 5.0°C to 7.0°C temperature difference between the cold plate base and inlet fluid temperature, depending on the model. This process improves thermal performance by more than 30% as compared to commercially available cold plates.

Customization is also available. ATS can design cold plates to meet size restrictions and manufacture cold plates to connect with a variety of components. The ATS Cold Plates are compatible with industry accepted coolants; for coolant with particles, #60 filters or finer are offered.

Features & Benefits:
• 30% improvement in thermal performance
• Compatible with industry accepted coolants
• 1/4 NPT threaded input and output
• Low pressure drop
• Lightweight for easy transport
• Provides uniform cold plate surface temperature when IGBTs are installed
• Maximum pressure: 60 psi
• Industry standard threaded hole
• Leak Free (100% tested: 100 psi)
• Custom Options include fitting types, material types, device mounting and more

Applications:
• Automotive Industry
• Uninterruptible Power Supplies
• Wind Turbines
• Photovoltaic Inverters
• Power Electronics
• Induction Heaters
• Motor Devices
• Utility Vehicles
• Power Devices

New Yorker Electronics is a franchised distributor for ATS and carries its full line of High-Performance Heat Sinks and Heat Sink Tools and Attachments, Closed and Open Loop Wind Tunnels and Controllers, Round and Flat Heat Pipes, Advanced Fan Trays, Liquid Cooling: Flow Meters, Leak Detectors, Chillers and Heat Exchangers, TEC Assembly and Modules, and Next-Gen Test Instruments such as Temperature and Velocity Measurement, Pressure Measurement, Surface Thermography and other specialty instruments.